Heartfelt Creations Pampered Pooch Birthday Card

I had a lot of fun making this birthday card for my brother-in-law.  He loves dogs so I used the Heartfelt Creations Pampered Pooch collection from The Rubber Buggy on-line store:

Heartfelt Creations Pampered Pooch 12 x 12 paper
Heartfelt Creations Pampered Pooch Pals die set
Heartfelt Creations Pampered Pooch Pals stamp set
Heartfelt Creations Pampered Pooch Paw-fect Pooches die set
Heartfelt Creations Pampered Pooch Paw-fect Pooches stamp set
NUVO Crystal Drops Ivory Seashell
Scrapbook Adhesive 3D Foam Tape
Scor-Pal Scor-Tape 1/2"

Other supplies:  Ghost line Poster Paper

Instructions:  

Select the papers as shown below in the Heartfelt Creations Pampered Pooch 12 x 12 paper collection.  The front of the card and inside of card of paper selected below measured 6" x 6".

Also, cut the dog with the cake shown below 3 1/2" x 4 1/2".   Using a heavy weight white poster paper or heavy weight card stock, cut 6" x 12".

Front of Card

Instructions for Front of Card:

Outside blue frame square measures 6 1/2" x 6 1/2.  Glue the Heartfelt Creation Pampered pooch image on the blue frame.  Using the Heartfelt Creations Pampered Pooch Paw-fect Pooches stamp set, stamp the large bone.  Using the same die set, stamp Happy Birthday in the center of the bone.  I used Ranger Antique ink and sponged around the bone.  Cut the bone using the large bone die from the Heartfelt Creations Pampered Pooch Paw-fect Pooches die set.

Using the Heartfelt Creations Pampered Pooch Pals stamp set, stamp and collar.  I applied embossing ink on the buckle of the collar and then embossed it with copper embossing powder.  Put the collar end through the first hole of the buckle and glue it.  Stamp on the collar the beautiful sentiment "Life is Better With You In It" found in the Heartfelt Creations Pampered Pooch Paw-fect Pooches stamp set.    Cut a three inch Scrapbook Adhesive 3D Foam Tape nad tape the collar on the card.  I made these flowers using an old McGill flower punch and I applied the gorgeous NUVO Crystal Drops Ivory Seashell in the center of some of the flowers.

Inside of Card

The measurement of the picture of the dog is 3 1/2" x 4 1/2" and the brown frame around the picture is 3 3/4" x 5".  The paper (see photo above) from the Heartfelt Creations Pampered Pooch is 6" x 6".   I used an old stamp set for the sentiment.  

Inside of card

I cut the dogs out using the  Heartfelt Creations Pampered Pooch Pals die set and used a molding tool on the back of the dogs to give it a 3D dimension and glued the edges of the dogs onto the front of this picture.  

Now it is your turn to try these products out from 

The Rubber Buggy and see what you create! 




Remember to visit The Rubber Buggy store to shop for those gorgeous dies, stamp supplies and other supplies for all of your projects, scrap booking and card making.  





The Rubber Buggy Design Team has something new to share here.   Pop in often and see for yourself what is being shared by this talented group of inspiring designers!!



Have a fabulous crafting day!




I'll be back again next Saturday with a new card or project.




In the meantime, here are all The Rubber Buggy quick links you will need:

The Rubber Buggy Store

The Rubber Buggy Blog 

The Rubber Buggy Facebook 


Thank you again for stopping by 





Nancy Hill




Designer for The Rubber Buggy

Best Wishes

Hi, Nancy Hill for the Frantic Stamper Design team.  It is so much fun using the coordinating dies and stamps from Frantic Stamper.  Make sure to check out the beautiful Frantic Stampers' February 2017 die & stamp release - Feminine Style.  The Frantic Stamper Ornate Edger-10125 is another gorgeous die from the February release.  

Frantic Stamper Ornate Edger 10125

Supplies:
Dies:  Frantic Stamper Ornate Edger 10125, 

Cheery Lynn Best Wishes dies
Embossing Folder:  Sue Wilson Rambling Rose
Paper:  Blue Fern Studio-Courtship-Lover's Lane, white card stock, Bazzill (Pink), Gold Metallic card stock, heavy weight white card stock 110 lbs to 140 lbs weight.
Accessories:  Adhesive, Zutter Bow It All V2, 1/2" wide coral ribbon, NUVO Crystal Drops (Ivory Seashell), 1/4" wide Scor-Tape 

Instructions:
Using the Frantic Stamper Ornate Edger - 10125, cut one with white/gold shimmer card stock and the other with gold metallic card stock.  Adhere the die cuts as shown above.  Die cut the Cheery Lynn Best Wishes with gold metallic card stock. Cut 5 3/4" x 7 3/4" white card stock and emboss the bottom half with Sue Wilson Rambling Rose embossing folder..   Cut the Blue Fern Studio paper 5 1/2" x 5 1/2"  and adhere to white card stock.  Cut 6" x 8" pink card stock and adhere to the white card stock.  Cut 8" x 13" heavy weight white card stock and score in the center.  Adhere the pink card stock to the heavy card stock.  Adhere the bow and ribbon to the card.  Cut the Best Wishes with gold metallic card stock and adhere to card.  Add 5 dots of NUVO Crystal Drops - Ivory Seashell.  For additional accent, cut out a butterfly and adhere to the card.  

I hope that I inspired you to make your next cards using the Frantic Stamper Ornate Edger. Also, make sure to stop by to see what Frantic Stamper creative and talented design team made for you:

http://franticstamper.blogspot.com

https://www.facebook.com/franticstamper/

https://www.pinterest.com/franticstamperi/frantic-stamper-precision-dies/

https://www.flickr.com/search/?text=Frantic%20Stamper

Happy Crafting
Nancy Hill

The Lord is My Sheperd

Hi, Nancy from Tutti Designs Team, and have you checked out the 22 new beautiful spring and Easter dies found in the Tutti Designs January Released folder.  You'll be amazed at the gorgeous details in these dies.  Besides Easter, many of these dies would be beautiful on Sympathy cards as well as other occasions.  

With this die, I cut it out with white card stock and also Recollection Mercury Glass card stock  for the lamb.  I colored the flowers and grass with Copic markers.  I typed and printed the sentiment, "The Lord in My Sheperd" using the Palace Script MT font, size 48.  I cut it out using the Cheery Lynn Horizontal Fish Tail Banner die and adhered it to the card with craft foam tape to make it stand out. 

Supplies:

Tutti Designs Easter Lamb die

Recollection Mercury Glass Card Stock

Dana Designs - Happy Boy Plaid Card Stock

Centura White Gold Shimmer card stock

Yellow card stock 

Copic Markers

Computer and printer

Wild Orchid Craft flowers

Sue Wilson Nobel Pierced Square die set for the frame around the die.

Sue Wilson Rambling Rose embossing folder

Scrapbook Adhesive Craft Foam Tape

NUVO Crystal Drops - Yellow Dandelion and Red

Aleene Fast Grab Tacky Adhesive Spray

Cheery Lynn Horizontal Fish Tail Banner

Now it is your turn to try this gorgeous Tutti Designs die and see what you create! Click HERE to see the  Tutti Designs dies.

Reminder to visit the Tutti Designs Blog to see what our other designers have created for you.  Explore more ways of using this die as well as other Tutti Designs dies, visit our Tutti Designs designers on the Tutti Designs Pinterest or Tutti Designs Facebook .

Happy Crafting!

Nancy Hill, Design Team 

Happy Valentines Day

Welcome back! Hi, Nancy Hill for Frantic Stamper Design Team and excited to share with you another gorgeous 2017 February die called Frantic Stamper Precision Die-Beautiful Rose. It is so much fun working with the gorgeous Frantic Stamper dies and you must check out the new 2017 February dies and Frantic Stamper slide show.

Supplies: 

Frantic Stamper Precision Die-Beautiful Rose-10120

Red Metallic card stock

Gold Metallic card stock

Sue Wilson Embossing Folder-Bed of Roses

Sue Wilson Rectangle Pierced die set

Cheery Lynn word dies:  Happy Valentines

3mm Flat back Pearls

White/Gold Shimmer Paper

May Art White Ribbon

Heart Slider Buckle

Aleene Fast Grab Spray Glue

Adhesive

Instructions:

Cut out the Frantic Stamper Beautiful Rose with red metallic card stock and Happy Valentines with gold metallic card stock.

Cut 5 1/4" x 6 1/4" of white/gold shimmer paper and emboss with Sue Wilson embossing folder - Bed of Roses

Adhere the Happy Valentines and Frantic Stamper Beautiful Rose on the embossed paper.

Using the white/gold card stock, cut out the white frame with the Sue Wilson Rectangle Pieced die set.  Outside frame will finish with 5 1/2 x 6 1/2" and inside will be 5 1/4" x 6 1/4"

Cut 6" x 7" rectangle with red metallic card stock.

Adhere the embossed paper in the center of the 6" x 7" red metallic card stock.

Adhere the white/gold shimmer frame in the center and top of the embossed paper.

Adhere 3mm flat back pearls around the frame.

Add a bow and heart slider buckle.

Be sure to see all of the Frantic Stamper dies and stamps by clicking HERE.  

Happy Crafting

Nancy Hill

Heartfelt Creations Blushing Rose Lavender Thank You Card

I love spending time in my craft room.  I have so many thank you cards to send after Christmas.  I wanted to share with you another Thank You tri-fold card that I made for our son's family. 

The Rubber Buggy On-Line store has all of the wonderful supplies you will need for this card:  

Heartfelt Creations Blushing Rose 12" x 12" Paper
Heartfelt Creations Blushing Rose Swirls Stamp Set
Heartfelt Creations Blushing Rose Swirls Emboss and Die Set
Heartfelt Creations Regal Borders and Pockets
Scor Pal Score-Tape  1/2" wide
Small brad painted yellow
Ranger Dye Ink Pad - Lavender Field
Tim Holtz Distress Ink - Antique Linen

Instructions:  I made this instructions for you to follow with steps and measurements:  

How to Make a Heartfelt Creations Blushing Rose Collection Tri-Fold Card by Nancy Hill on Snapguide

I typed this sentiment on my computer and printed it out.  I sponged around the print out with  Ranger Distress Antique Linen ink.

I cut this label out of the Heartfelt Creations Blushing Rose Collection, punched a hole on top and stuck a yellow brad in the hole. If you don't have a yellow brad, you can color any brad with your Copic markers or paints.   I used Scor-Tape to tape the label on the card.  

Now it is your turn to try these products out from 
The Rubber Buggy and see what you create! 

Remember to visit The Rubber Buggy store to shop for those gorgeous dies, stamp supplies and other supplies for all of your projects, scrap booking and card making.  

The Rubber Buggy Design Team has something new to share here.   Pop in often and see for yourself what is being shared by this talented group of inspiring designers!!

I'll be back again next Saturday with a new card or project.

In the meantime, here are all The Rubber Buggy quick links you will need:

The Rubber Buggy Store

The Rubber Buggy Blog 

The Rubber Buggy Facebook 

Thank you again for stopping by 

Nancy Hill

Designer for The Rubber Buggy

Book Card Template

Book Card Template

Copy and paste this template to your word document or send to a print shop to enlarge.   

Enlarge 1/4" for each pages that will be behind the main page.  

Holy Crosses

Welcome back.  Nancy Hill with Tutti Designs for every Tuesday and excited to show you my card with the gorgeous Tutti Designs Holy Crosses in the Tutti Designs' January release.   

Isn't this die just stunning and you can probably image many ways of using this die for your cards and projects.   The Holy Crosses die measures 4 1/4" x 5 1/2".  My finished card measures 6 1/4" x  8".  

I cut the Holly Crosses using the Recollection Gold Foil card stock and adhered it to the card with Aleene Fast Grab Tacky adhesive spray.  Lately, I have been using this adhesive spray for all of my dies since it is easy to use and the entire die cut sticks to the card.

I love adding flowers and bows/ribbons to all of my cards.  I used the Zutter Bow It All to make all of my bows like the one below.

Supplies:
Tutti Designs Holy Crosses
Heartfelt Creations Arianna Blooms Collection
Sue Wilson Die Petite Peony Cluster
1/2" wide white satin ribbon
Our Daily Bread Designs Crosses Stamp
Resin angel - I made using a mold
Aleene Fast Grab Tacky Adhesive Spray

Now it is your turn to try this gorgeous Tutti Designs die and see what you create! Click HERE to see the  Tutti Designs dies.

Reminder to visit the Tutti Designs Blog to see what our other designers have created for you.  Explore more ways of using this die as well as other Tutti Designs dies, visit our Tutti Designs designers on the Tutti Designs Pinterest or Tutti Designs Facebook .

Thank you again!

Nancy Hill, Design Team 

Quilted Card

Hi, Nancy Hill for Frantic Stamper and excited to share with you two gorgeous dies from Frantic Stamper in the January release:  Quilt Rectangle 10127 and In Stitches 10185.

Starting with the center measurements of my card: 
Center square measures 2" x 2"
Pink frame behind it is 4" x 5 1/4".
White frame is 4 3/4" x 5 3/4".
Pink frame for the entire card is 5 1/4" x 6 1/4".

First, I cut out a 3/4" x 5" white card stock for gluing the frame and quilt pieces.

Special tip:  I love using fabric softener sheets for several purpose but perfect for this project.  I laid the fabric softener sheet behind the card stock before cutting out the die cut. The pieces will stay on the fabric softener sheet and I can peel off individual pieces and adhere it to the Quilt Rectangle Card Panel frame that was cut with white shimmer card stock.

I can used the remaining pieces on the fabric softener sheet for two more cards using the Frantic Stamper Quilt Rectangle Card Panel frame.

I used the Frantic Stamper 10185 In Stitches #2 for the square in the center of the card.  I added a bow and a  rose in the center of the bow.  I applied NUVO Crystal Drops Ivory Seashell to the top right and bottom left corners of the card.

I hope that I inspired you to make your next cards using the Frantic Stamper Quilt Rectangle Card Panel and  In Stitches #2 die sets.  Check out the other gorgeous Frantic Stamper dies and stamps along with the rest of the wonderful craft products.  

Happy Crafting
Nancy Hill

Tri-Fold Card Tutorial and Heartfelt Creations Blushing Rose Collections

I am so excited to share my tutorial with you on how I made my Tri-Fold Card with the gorgeous Heartfelt Creations:  Blushing Rose Paper Collection, Blushing Rose Stem, Heartfelt Creations Regal Borders and Pockets, and
NUVO Crystal Drops-Gloss-Dandelion and Scor-Tape 1/2" width. All of these wonderful supplies came from The Rubber Buggy on-line store.  


Check out How to Make a Tri-Fold Card by Nancy Hill on Snapguide and see the rest of the card.  

Now it is your turn to try these products out from 
The Rubber Buggy and see what you create! 

Remember to visit The Rubber Buggy store to shop for those gorgeous dies, stamp supplies and other supplies for all of your projects, scrap booking and card making.  

The Rubber Buggy Design Team has something new to share here.   Pop in often and see for yourself what is being shared by this talented group of inspiring designers!!

I'll be back again next Saturday with a new card or project.

In the meantime, here are all The Rubber Buggy quick links you will need:

The Rubber Buggy Store

The Rubber Buggy Blog 

The Rubber Buggy Facebook 

Thank you again for stopping by 

Nancy Hill

Designer for The Rubber Buggy

A Little Birdie Told Me

Frantic Stamper Precision Die - Wild Rose Corner - FRA-10113

Hi, Nancy Hill for the Frantic Stamper and excited to share with you a card that I made using the gorgeous Frantic Stamper Wild Rose Corner die in the new February 2017 die & stamp release - Feminine Style.  Check out the wonderful video on the Frantic Stamper 2017 February release dies and stamp sets by clicking HERE.

Supplies: 

Frantic Stamper Precision Die - Wild Rose Corner - FRA-10113

Heartfelt Creations Arianne Paper

Copic Markers

Rose Seam Binding Ribbon

Adhesive

Hampton Art Clear Stamp-My Sentiment Exactly

White card stock

Instructions:

Main card frame 6 1/4" x 12 1/2"  I use white Ghostline Poster Board for my main card frame.  Score in the center of the 12 1/2".  

Center and adhere the 6 " x 6" Heartfelt Creations Arianne patterned paper to the front of the card.

Cut two sets of Wild Rose Corner with white shimmer card stock.
Color the flowers with Copic Markers RV55 and center Y13.
Color the leaves with G29 and G02.
Mold the separate flowers with your fingers or flower molding tools to give it shape and adhere to the flowers connected to the leaves.
Adhere both sets of the Wild Rose Corner flowers to the card.
Add a rose seam binding bow between the flowers.
Stamp the sentiment in the center.