Pumpkin 3

Welcome back and don't you love the colors of fall.  I am excited to share my three cards made for the The Rubber Buggy blog with the gorgeous Lawn Fawn and 28 Lilac Lane products.  The Rubber Buggy on-line store has all of the wonderful products you will need to make you Fall/Halloween/Thanksgiving cards.

Isn't this fun making fall cards that can be used for many occasions with the gorgeous colors of fall.  I just fell in love with the beautiful Lawn Fawn Fall Fling  paper that comes in 6" x 6" and 12" x 12".  I cut out all of the Lawn Fawn Stitched Pumpkin Frame dies with the Lawn Fawn Fall Fling paper and also used this paper as the background.

With the card above, I used the Lawn Fawn Stitched Scalloped Rectangle Frames behind the wooden paper.  I cut out two Lawn Fawn Stitched Pumpkin Frames using the Lawn Fawn Fall Fling paper.  I glued the top pumpkin to a clear acetate sheet/clear sheet protector sheet and when the glue dried, cut the acetate pumpkin to the patterned paper.  I adhered the sequins and buttons from the 28 Lilac Lane Shaker Mix-Safari Sunrise on the bottom pumpkin and glued the top pumpkin with the acetate together. I adhered the pumpkin to the card along with a variety of leaves cut out from the Lawn Fawn Stitched Pumpkin Frame die set.  I used adhesive spray on the back of the Thanks die and adhered to front of the pumpkin.  

The techniques used in the first card about using the sequins is the same and used the Lawn Fawn Happy Birthday Border die and just cut off "To You" that was attached to the die cut.  There are many other Happy Birthday dies such as this one available on The Rubber Buggy that can also be used on a card like this one if sold out.  I used two rectangle frame dies to make the coral frame around the card.

I just love this Halloween card made with the Lawn Fawn products shown below.  This one is with the Lawn Fawn Bat Add On.  I will be showing next week Halloween gift boxes made with this adorable bat.  Also, Lawn Fawn has a tutorial on how to put this bat together.  I am glad that I watched if before putting this critter together with a lot of helpful hints given on this tutorial.  Additionally, I used the Lawn Fawn Leafy Tree Background Portrait die and added a circle for the moon behind the tree.  I sponged on the Lawn Fawn Sunflower ink on the moon as well as used the Lawn Fawn Starry Sky die around the sky that was sponged with Ranger Distress purple inks.  I cut out the Happy Halloween die in a bronze mirror cardstock and in back cardstock and glue slightly together to create a shadow.  I added the 28 Lilac Lane sequins inside the pumpkin.  I used an ole spider punch around the card.  

Lawn Fawn Fall Fling 

Lawn Fawn Stitched Pumpkin Frame

 Lawn Fawn Bat Add On

Lawn Fawn Starry Sky die
28 Lilac Lane Shaker Mix-Safari Sunrise
Lawn Fawn Leafy Tree Background Portrait

Lawn Fawn Stitched Scalloped Rectangle Frames

So have fun crafting this weekend with these products.  Order now while these gorgeous dies, papers and stamps are still available.   My cards and projects are always posted on Saturday.  Keep watching and thank you so much for those wonderful comments as well as suggestions. 

Enjoy and Happy Crafting!

Great Pumpkin 2

Welcome back and don't you love the colors of fall.  I am excited to share my fall cards made for the The Rubber Buggy blog with the gorgeous Lawn Fawn and 28 Lilac Lane products.  The Rubber Buggy on-line store has all of the wonderful products you will need to make you Fall/Halloween/Thanksgiving cards.  

Isn't this fun making fall cards that can be used for many occasions with the gorgeous colors of fall.  I just fell in love with the beautiful Lawn Fawn Fall Fling  paper that comes in 6" x 6" and 12" x 12".  I cut out all of the Lawn Fawn Stitched Pumpkin Frame dies with the Lawn Fawn Fall Fling paper and also used this paper as the background.

With the card , I used the Lawn Fawn Stitched Scalloped Rectangle Frames behind the wooden paper.  I cut out two Lawn Fawn Stitched Pumpkin Frames using the Lawn Fawn Fall Fling paper.  I glued the top pumpkin to a clear acetate sheet/clear sheet protector sheet and when the glue dried, cut the acetate pumpkin to the patterned paper.  I adhered the sequins and buttons from the 28 Lilac Lane Shaker Mix-Safari Sunrise on the bottom pumpkin and glued the top pumpkin with the acetate together. I adhered the pumpkin to the card along with a variety of leaves cut out from the Lawn Fawn Stitched Pumpkin Frame die set.  I used adhesive spray on the back of the Thanks die and adhered to front of the pumpkin.  

Lawn Fawn Fall Fling 

Lawn Fawn Stitched Pumpkin Frame

 Lawn Fawn Bat Add On

Lawn Fawn Stitched Scalloped Rectangle Frames

So have fun crafting this weekend with these products.  Order now while these gorgeous dies, papers and stamps are still available.  I hope I have inspired you try out these products available at The Rubber Buggy on-line store.  My cards and projects are always posted on Saturday.  Keep watching and thank you so much for those wonderful comments as well as suggestions. 

Enjoy and Happy Crafting!

The Great Pumpkin 1

Welcome back and don't you love the colors of fall.  I am excited to share my  cards made for the The Rubber Buggy blog with the gorgeous Lawn Fawn and 28 Lilac Lane products.  The Rubber Buggy on-line store has all of the wonderful products you will need to make you Fall/Halloween/Thanksgiving cards.  

Isn't this fun making fall cards that can be used for many occasions with the gorgeous colors of fall.  I just fell in love with the beautiful Lawn Fawn Fall Fling  paper that comes in 6" x 6" and 12" x 12".  I cut out all of the Lawn Fawn Stitched Pumpkin Frame dies with the Lawn Fawn Fall Fling paper and also used this paper as the background.

  I cut out two Lawn Fawn Stitched Pumpkin Frames using the Lawn Fawn Fall Fling paper.  I glued the top pumpkin to a clear acetate sheet/clear sheet protector sheet and when the glue dried, cut the acetate pumpkin to the patterned paper.  I adhered the sequins and buttons from the 28 Lilac Lane Shaker Mix-Safari Sunrise on the bottom pumpkin and glued the top pumpkin with the acetate together. I adhered the pumpkin to the card along with a variety of leaves cut out from the Lawn Fawn Stitched Pumpkin Frame die set.  
The techniques used in the first card about using the sequins is the same and used the Lawn Fawn Happy Birthday Border die and just cut off "To You" that was attached to the die cut.  There are many other Happy Birthday dies such as this one available on The Rubber Buggy that can also be used on a card like this one if sold out.  I used two rectangle frame dies to make the coral frame around the card.

Lawn Fawn Fall Fling 

Lawn Fawn Stitched Pumpkin Frame

 Lawn Fawn Bat Add On

Lawn Fawn Starry Sky die
28 Lilac Lane Shaker Mix-Safari Sunrise
Lawn Fawn Leafy Tree Background Portrait

Lawn Fawn Stitched Scalloped Rectangle Frames

So have fun crafting this weekend with these products.  Order now while these gorgeous dies, papers and stamps are still available.  I hope I have inspired you try out these products available at The Rubber Buggy on-line store.  My cards and projects are always posted on Saturday.  Keep watching and thank you so much for those wonderful comments as well as suggestions. 

Enjoy and Happy Crafting!

Rawsome 2

Welcome back and Nancy, here, to share with you some fun cards to make for that special person.  I just love working with Lawn Fawn stamps, dies and paper collection like the Lawn Fawn Rawrsome stamp set that I used for this card along with the Lawn Fawn Reveal Wheel and other Lawn Fawn dies..  

Lawn Fawn Rawrsome Stamp Set

I love making these  Lawn Fawn Reveal Wheel   cards with Lawn Fawn stamp and die collections and so will you.  Lawn Fawn has a wonderful reveal wheel tutorial and I suggest that you watch this before adventuring out to make your first reveal wheel card.  Over the past several cards, I modified it just a little to fit each card but basically it is the same.  I would suggest finding flattest brad you can find for the circle in the wheel so that you don't get much of a warp in the center of the card.  Using a fatter 3D foam tape inside the reveal wheel helps to correct the warpness from the effects of the brad.  

Lawn Fawn Reveal Wheel Sentiments

Lawn Fawn Simply Puffy Clouds

I just love these cut little Lawn Fawn Simply Puffy Clouds, Lawn Fawn Stitched Mountains Border and Lawn Fawn Grassy Border for many of my cards.

Lawn Fawn Stitched Mountains Border and Lawn Fawn Grassy Border

Below, I made a fun explosion card using the Lawn Fawn Rawsome stamp set.  I fussy cut the dinosaurs since I didn't want any white edges and colored these dinosaurs with Copic Markers.  I sponged on Ranger Distress Tumbled Glass ink and  Lawn Fawn Sunflower Yellow ink to create the sky.

I always highly recommend using a stamp tool like the Tim Holtz or My Sweet Petunia Misti stamp tool for all of your stamping to save time, money and get the top quality of stamping that you need for all of your cards and scrap book pages.  Research it out to get the right one for you and don't go small but start with at least a 6 x 8 or larger stamping surface.  I use the 6 x 8" but wish I purchased the 12" x 12" Misti stamp tool.

So have fun crafting this weekend with these products.  My cards and projects are always posted on Saturday.  Keep watching and thank you so much for those wonderful comments as well as suggestions. 

Enjoy and Happy Crafting!

Rawrsome Lawn Fawn

Welcome back and Nancy, here, to share with you some fun cards to make for that special person.  I just love working with Lawn Fawn stamps, dies and paper collection like the Lawn Fawn Rawrsome stamp set that I used for this card along with the Lawn Fawn Reveal Wheel and other Lawn Fawn dies..  

Lawn Fawn Rawrsome Stamp Set

I love making these  Lawn Fawn Reveal Wheel   cards with Lawn Fawn stamp and die collections and so will you.  Lawn Fawn has a wonderful reveal wheel tutorial and I suggest that you watch this before adventuring out to make your first reveal wheel card.  Over the past several cards, I modified it just a little to fit each card but basically it is the same.  I would suggest finding flattest brad you can find for the circle in the wheel so that you don't get much of a warp in the center of the card.  Using a fatter 3D foam tape inside the reveal wheel helps to correct the warpness from the effects of the brad.  

Lawn Fawn Reveal Wheel Sentiments

Lawn Fawn Simply Puffy Clouds

I just love these cut little Lawn Fawn Simply Puffy Clouds, Lawn Fawn Stitched Mountains Border and Lawn Fawn Grassy Border for many of my cards.

Lawn Fawn Stitched Mountains Border and Lawn Fawn Grassy Border

Below, I made a fun explosion card using the Lawn Fawn Rawsome stamp set.  I fussy cut the dinosaurs since I didn't want any white edges and colored these dinosaurs with Copic Markers.  I sponged on Ranger Distress Tumbled Glass ink and  Lawn Fawn Sunflower Yellow ink to create the sky.

I always highly recommend using a stamp tool like the Tim Holtz or My Sweet Petunia Misti stamp tool for all of your stamping to save time, money and get the top quality of stamping that you need for all of your cards and scrap book pages.  Research it out to get the right one for you and don't go small but start with at least a 6 x 8 or larger stamping surface.  I use the 6 x 8" but wish I purchased the 12" x 12" Misti stamp tool.

So have fun crafting this weekend with these products.  My cards and projects are always posted on Saturday.  Keep watching and thank you so much for those wonderful comments as well as suggestions. 

Enjoy and Happy Crafting!

Golden Anniversary card

I used the Sue Wilson Swirling Heart embossing folder with the Tattered Lace Celebrate Heart die.  I printed out the sentiment.  I added a handmade bow and used a rhinestone heart with a rose in the center.

I am entering this card in
The Sisterhood of Crafters:  Embossing  Wet or Dry
Scrapyland #121 - Anything Goes

My cards and projects are always posted on Saturday.  Keep watching and thank you so much for those wonderful comments as well as suggestions. 

Enjoy and Happy Crafting!

Jump for Joy 1

You'll jump for joy with this cute Lawn Fawn Jump For Joy Stamp set of critters and fall leaves! I created a fun fall scene with critters leaping into a pile of leaves, and stamping little smiles into the leaves for an extra happy card!  I colored these critters with Copic Markers and used scissors to cut them out rather than the Lawn Fawn Jump for Joy die set that is available with this collection.

I love this simple Lawn Fawn Tree Backdrop die with lots of leaves to choose from to create the perfect tree for any season. I used the  the stitched semi-oval shape behind the tree from this set with sponged Ranger Distress inks for a quick leafy tree top. I adhered the little leaves on the end of the branches for a more detailed tree.  
I created the hillside with the Lawn Fawn Stitched Hillside border and stamped the sentiments using the Lawn Fawn Jump For Joy Stamp set.  

I sponged on Ranger Distress Ink Tumbled Glass on the Photo Play Plaid Fall Paper pad and also used another patterned paper to frame the card. I cut out white cardstock and sponged on warm colors of Ranger Distress inks to coordinate with the plaid paper.   

Lawn Fawn Jump For Joy Stamp and  Lawn Fawn Stitched Hillside border

 Photo Play Plaid Fall Paper pad  and  Lawn Fawn Tree Backdrop
Beacon 3-In-1 Advanced Craft Glue

I am entering this card in the following challenges:
Scrapyland Challenge #121:  Anything Goes

 So have fun crafting this weekend with these products.  My cards and projects are always posted on Saturday.  Keep watching and thank you so much for those wonderful comments as well as suggestions. 

Enjoy and Happy Crafting!

Jump for Joy

The Rubber Buggy on-line store has all of your favorite name-brand products and supplies with the top-notched customer service.  You'll jump for joy with this cute Lawn Fawn Jump For Joy Stamp set of critters and fall leaves! I created a fun fall scene with critters leaping into a pile of leaves, and stamping little smiles into the leaves for an extra happy card!  I colored these critters with Copic Markers and used scissors to cut them out rather than the Lawn Fawn Jump for Joy die set that is available with this collection.

I love this simple Lawn Fawn Tree Backdrop die with lots of leaves to choose from to create the perfect tree for any season. I used the  the stitched semi-oval shape behind the tree from this set with sponged Ranger Distress inks for a quick leafy tree top. I adhered the little leaves on the end of the branches for a more detailed tree.  
I created the hillside with the Lawn Fawn Stitched Hillside border and stamped the sentiments using the Lawn Fawn Jump For Joy Stamp set.  

I sponged on Ranger Distress Ink Tumbled Glass on the Photo Play Plaid Fall Paper pad and also used another patterned paper to frame the card. I cut out white cardstock and sponged on warm colors of Ranger Distress inks to coordinate with the plaid paper.   

Lawn Fawn Jump For Joy Stamp and  Lawn Fawn Stitched Hillside border

 Photo Play Plaid Fall Paper pad  and  Lawn Fawn Tree Backdrop
Beacon 3-In-1 Advanced Craft Glue

 So have fun crafting this weekend with these products.  Order now while these gorgeous dies, papers and stamps are still available.  I hope I have inspired you try out these products available at The Rubber Buggy on-line store.  My cards and projects are always posted on Saturday.  Keep watching and thank you so much for those wonderful comments as well as suggestions. 

Enjoy and Happy Crafting!